How To Sew A Collar With Collar Band?

The 2 Simplest Ways to Attach a Collar to a Shirt

Sew the actual collar, press and turn it, topstitch it, and set it aside until needed for either method.

Step 1: Staystitch the neckline

Staystitch the neck edge where you’ll attach the collar, as you’ll need to clip this seam allowance. Sew the shoulder seams of your shirt, joining front to back. Apply any button bands or finish the front closure edges as instructed by the pattern.

Step 2: Prepare your collar and collar stand

Apply interfacing to one of the collar stands and use a felt pen, chalk, colored pencil, or tailor’s tacks to mark the stitching line at either end. Press the neckline edge upward along the seam allowance for the inner collar stand; you can trim this seam allowance down to u00bc if you prefer.

Step 3: Sew collar stand edges

Step 1: Align the upper edge of the three pieces. Step 2: Stitch on the interfaced side so you can follow the guide line in Step 2. Step 3: Stitch on the interfaced side so you can follow the guide line in Step 2.

Step 4: Trim seam allowance

To avoid having to add notches, make sure the two ends of the stand and collar are sewn together first, then trim the seam allowance to leave 1/8u2033 along the stitching.

Step 5: Turn and press

Turn the collar stands right side out and press; it’s beginning to resemble a shirt collar at this point!

Step 6: Attach to the neck edge

Match the dots and notches on the collar stand to the shirt neck edge, clipping the seam allowance on the shirt as needed. Don’t catch the inner collar stand in this stitching; it will be finished in the next step.

We recommend reading:  How To Knit A Star Hat?

Step 7: Press and edge stitch 

Method 1 of attaching a collar with stand to a shirt: Press the collar and stand over a ham (a ham is better than an ironing board because it’s a curved seam), pin the bottom edge of the inner collar stand to enclose, and edge stitch all around.

Step 1: Prep the collar pieces

Apply interfacing to the collar stand piece that will be on the outside of the neckline, and mark all the dots, notches, and the stitching line on the collar ends. The second method follows some of the same steps as the first.

Step 2: Attach collar stands to shirt

Pin the collar stands to the shirt neckline edge, folding the front of the shirt away from the corner. Pin and sew one of the interfaced collar stands on with a long basting stitch just to get it in place with any kind of tricky fabric (such as silk).

Step 3: Stitch collar stands to shirt

Stitch where indicated (with the red felt pen, or according to your pattern). Be sure to pivot at the exact point where the shirt’s edge begins to create a crisp edge.

Step 4: Trim seam allowances

Trim the seam allowance at the neckline to reduce bulk, then trim the corner where you pivoted to the curved portion to about 1/8u2033 (this eliminates the need to notch the seam allowance). Cut one side at a time, keeping the shirt front away from your scissors.

Step 5: Turn and press

Once you’ve trimmed the seam allowances on the curved edges, they should turn right side out easily. Press the edges of the collar stand in at the seam allowance, and press that edge, making sure the collar stands are smoothed away from the body of the shirt.

We recommend reading:  Question: How To Sew Onto A Shirt No Machine?

Step 6: Add the collar

The shirt collar will be attached to the outside of the stand in the next step; you can either baste the collar right sides together to attach it to the outer collar stand, or you can insert the collar between the collar stands and attach it in one step.

Step 7: Edge stitch to complete the collar

If you missed it in Method 1, place the collar in between the two collar stands, matching the seam allowance and pin in place, then enclose the collar stand as in Method 1 by edge stitching all around.

How do I make a collar and collar stand?

Tutorial on Collars and Collar Stands

  1. Place collar pieces face-to-face and stitch around the outer edge of the collars.
  2. Press lower edge of outer collar stand upwards to secure seam allowance.
  3. Place collar between collar stands and stitch together.
  4. Turn to face and press neatly.

How do you make a notched collar?

How to Sew a Jacket Lapel with Notches

  1. Interface the undercollar.
  2. Trim and understitch the collar’s upper edge, then sew the corner seams.
  3. Trim the end seam allowances to 1/4 inch.
  4. Prepare to turn the collar right side out.
  5. Fold the completed collar along its roll line.

Why are collars attached first before the sleeves?

The placket sleeve does not need to be sewn to the bodice in this step; it will be joined once the collar is attached. First, attach the front and back pieces to the sleeve pieces, as shown in the picture.

We recommend reading:  How To Knit A Scarf That Doesn'T Curl?

What stitch is used for a collar?

Now it’s time to sew the collar in place, which can be done in one of two ways: overcasting (also known as oversewing or whipstitching) or backstitching.

Why is a collar called a collar?

Collars were used as neck-protecting armour until around 1300, according to the Oxford English Dictionary.

What is a two piece collar?

The two-piece shirt collar is made up of two different collars: the band, which is essentially a Mandarin Collar with an extension to the value of the button placket, and the top part, which is a Turnover Collar with a different shape to the collar points.

Leave a Reply

Your email address will not be published. Required fields are marked *