Question: How To Sew Handles To A Toe Bag That Is Lined?

Simple Tote Bag Tutorial

This quick and easy tutorial will show you how to make a simple tote bag with no special skills. If you can sew a straight stitch on your sewing machine, you can make this bag!

Materials

Thread in a coordinating color to match the color of the grips or handles, 1/2 yd. Lining Fabric (Lining).

A Simple Tote Bag Tutorial

Because it’s lined, this simple tote bag tutorial has a professional-finished look and is one sturdy bag (perfect for library books or groceries). Finished Tote Bag Size: 13u2033 x 13 x 2u2033.

Step 1:  Cut Out Fabric

Cut (2) 14″ x 14″ for the main body of the bag from Exterior Fabric (A), 14″ x 14″ for the bag lining from Lining Fabric (B), and 2 4u2033 x 22u2033 for the bag handles from Exterior Fabric (B).

Step 2:  The Bag Handles

Top stitch 1/8u2033 down both sides of bag handle, using a 3-4mm stitch length. Pro Tip: If you have an Edge Stitch Foot, this is the perfect place to use it!

Step 3:  Making the Body of the Bag

Stitch the side seams and bottom of the Exterior Fabric with right sides together, leaving the top open, using a 1/4 seam allowance. Note: For the longest piece of fabric, change your stitch length back to 2.5mm.

Step 4:  Making a Pleat in the Bag

To make a pleat, fold the bottom corner of your bag so that it creates a triangle in the corner, matching up the side seam and bottom seam will make this line up perfectly.

Step 5:  Putting it all Together

Place the raw edges of the bag handles side by side, about 5 inches apart, pin in place, and repeat on the opposite side of the bag, making sure the handles are straight and not twisted.

We recommend reading:  How To Knit Toy Doll Hands?

Step 6:  Finishing Touches

Use an Edge Stitch Foot to finish off the bag’s lining fabric by top stitching around the entire top of the bag with a 1/8 seam. Pro Tip: Make sure the bag is right side out before sewing!

Other ideas for this bag

The possibilities are endless with this bag: add Fusible Fleece to make it firmer, or applique a monogram or favorite design. You can also scale the bag up 1u2033 at a time until you find the perfect size.

How do you line a tote bag with handles?

Unfold the top edge of the tote bag and match the top of the lining to the top crease. Pin or clip it in place. Slide the tote bag inside the lining so that the right sides of the fabric are facing each other. Tuck in the handles and align the side seams.

What kind of fabric is used for tote bags?

The canvas, denim, upholstery, or drapery fabric will best suit their needs. Nylon totes are usually made without interfacing because they are meant to be flimsy and flexible, and are typically used to carry a change of clothes.

How do you sew a bag with sides and bottoms?

Sewing a Bag with Sides and a Bottom: Steps

  1. Step 1: Pick your fabric.
  2. Step 2: Cut your fabric.
  3. Step 3: Sew the faces to the sides.
  4. Step 4: Sew the lining together.
  5. Step 5: Sew the straps.
  6. Step 6: Sew the lining to the fabric.
  7. Step 7: Sew the lining to the fabric.
We recommend reading:  Often asked: How To Sew Chevrons On New Working Uniform Navy?

How do you sew elastic pockets into a bag?

  1. Draft pocket piece.
  2. Cut pieces, place right sides facing, and sew.
  3. Press, fold over, and stitch elastic casing.
  4. Mark center on pocket and bag piece.
  5. Feed elastic through and secure ends.
  6. Gather bottom edge to match bag piece.

How do you make a flap?

Procedures

  1. Apply fusible interfacing to the wrong side of the upper flap piece.
  2. Pin the two flap pieces right sides together.
  3. Stitch the two pocket flaps right sides together at the indicated seam allowance (3/8u201d in our case).

How do you make a messenger bag step by step?

Sewing Instructions for the Messenger Bag Pattern

  1. Step 1: Cut out the bag fabric pieces.
  2. Step 2: Make the lining bag.
  3. Step 3: Make the outer bag.
  4. Step 4: Make the messenger bag’s flap.
  5. Step 5: Attach the flap to the outer bag.
  6. Step 6: Make a long strap for the bag.
  7. Step 7: Baste the strap.

How do you make tote bags?

  1. Step 1: Determine the size of your tote.
  2. Step 2: Determine how much fabric you’ll need.
  3. Step 3: Layout and Cut the Fabric.
  4. Step 4: Hem the Top Edge.
  5. Step 5: Attach Webbing Handles.
  6. Step 6: Sew the Side Seams.
  7. Step 8: Sew the Bottom Shut.

Leave a Reply

Your email address will not be published. Required fields are marked *