Question: How To Sew Original Hem On Jeans?

How to Hem Jeans with the Original Hem (Ultimate Guide!)

Hemming jeans is one of the best ways to shorten jeans because it preserves the look of the denim with all of its unique distressed and washed out features by keeping the original hem. This method works best for straight or tapered leg jeans.

Supplies Needed to hem jeans with the original hem:

Fabric scissors are my absolute favorite fabric scissors. They are also known as lock stitching (also known as straight stitching) and zig zag stitching.

Determing which hemming method to follow:

With a ruler or measuring tape, measure the width and length of each leg, then mark the position for your new hem with pins or washable chalk/ wax.

For Straight Leg Jeans

Measure the distance between the folded edge and the stitched hem as shown. Refold the hem by half the distance you measured previously. Sew all the way around with a zig zag stitch or a serger to finish the raw edge.

For Tapered Leg Jeans:

Folding, PIN, SEW, and CUT are the same as above for hemming a tapered leg jean. Extra step is to reduce the width of the leg at the new hem position, and then fold the hem back up to see the difference. Fabric no longer bunches when the hem is folded up!

How do you hem jeans with original hem?

Hem Jeans by Hand is a step-by-step guide on how to hem jeans by hand.

  1. Pin the cuff after measuring around each leg.
  2. Stitch in a line just below the bottom seam.
  3. Continue sewing in a line all the way around the cuff.
We recommend reading:  Readers ask: How To Sew A Part Into A Wig?

What does original hem mean?

Original Hem: cutting and replacing the original bottom, then sewing the original hem back on (the seam is opened, placed over the cut jean bottom, and sewn back in place). Regular Hem: cutting off the excess length, folding, and sewing a basic hem.

What stitch is used to hem jeans?

Stitch around the edges of your jeans to prevent fraying with a standard sewing machine zig-zag stitch or a serger on the edges. Pin the jeans with a 12 inch seam allowance all the way around on both legs after you mark and cut them.

Can you hem flare jeans?

The hem of a flare jean should cover most of your shoes without going all the way to the floor, in order for the piece to properly lengthen your legs; if the hem is too long, it will look sloppy; if the hem is too short, it will look funny; if you’re re-hemming them afterward, consider the length of your favorite “go to” shoes as well.

What is raw hem jeans?

It’s also known as frayed hem or released hem, and while you may not know the “official” name, I’m sure you’ve seen it u2014 it’s that seemingly DIY trend that looks like you skipped the tailor and just cut off the jeans yourself.

How much does it cost to hem jeans?

Denim is a fabric that is used to make

Denim Approximate Cost
Hem $10 – $20
*slimming works best on Original Hem $15 – $25
non-distressed denim Slim Leg $25 – $35
Adjust Waist $25 – $35
We recommend reading:  How To Knit A Wall Hanging?

How do you hem pants quickly?

  1. Try on your to-be-hemmed pants and tuck the hem under to the desired length.
  2. Take off jeans and turn inside out.
  3. Take out all pins and turn jeans right side out.
  4. Sew a straight stitch very close to the existing hem with your heavy duty needle and matching thread.

How do you hem jeans waist?

Turn your jeans inside out and put them on, pinching the waistband on each side until you get the right fit in the waist. Try to pinch an equal amount on both sides so your jeans sit evenly after the alteration.

Can I cut my jeans to make them shorter?

Cut the hem off your jeans with fabric (or super sharp) scissors, cutting slowly and following your chalk mark for a nice straight edge. It doesn’t have to be perfect, but you don’t want it uneven (unless that’s the style you’re going for!)

Leave a Reply

Your email address will not be published. Required fields are marked *