How to Sew a Button – BEGINNERS Guide
This tutorial will show you how to sew a button easily and quickly by hand or machine in just a few simple steps; don’t worry if you don’t know how to sew. Easy Steps to Sew a Button – A Beginner’s Guide
How to Sew a Button
There are two types of buttons: flat buttons and shank buttons, and the first part of this tutorial will show you how to sew a button by hand. If you only have one or two buttons to sew, hand stitching is much faster and often better than pulling out your machine.
Types of Buttons
Flat buttons, which can have two or four holes, are the most common type of button. Shank buttons, on the other hand, have no holes on the top and instead have the holes through an extra barrel-shaped piece at the back of the button.
How to Sew a Button – The Video
Subscribe to the Treasurie YouTube channel for all the latest crafting and DIY videos. How to Sew a Button. Here is a short video I made to show you how to sew the three types of buttons by hand.
Step 1 – Thread the Needle
Cut 16 inches of thread and double-thread it through your needle; a single thread will not be strong enough for button sewing. How to Sew a Button – How to Thread a Needle
Step 2 – Mark the Position
Cut any excess thread after the knot – this will be hidden by the button when you are finished. If you are replacing a button, you can clearly see where to sew it; for sewing patterns, it should be marked on the pattern piece with a cross or dot.
Step 3 – Stitch the Button On
Make sure the button is centered on the mark before threading the needle through one side of the button and back through the opposite hole. Stitch through the holes a few more times to ensure the button doesn’t lose its shape or match.
Step 4 – Knot Off
Sew a button with two holes by wrapping the thread around the stitches a few times, passing the needle to the side, and knotting it off. See the diagram below for instructions on how to sew a button with two holes.
How to Sew a Button By Hand – With 4 holes
This method is similar to the two-hole button method above, but it involves marking the needle’s position in the same way as the button buttons.
Step 3 – Stitch the Button
Most four-hole buttons are sewn in a cross pattern, but you could sew it across or down to create two bars; as long as you use a strong thread and enough stitches, it will hold just as well.
Step 4 – Knot Off
Wrap the thread around the stitches at the base of the button a few times, then pass the needle to the side and knot it off. How to Sew A Button with Four Holes, by Joanna Wortham for BBC Countryfile, 39.99 plus postage.
How to Sew a Button by Hand – With a Shank
To sew a button with a shank, thread your needle with double thread and mark the position of the needle in the correct direction instead of passing it through the center of the button.
Step 3 – Thread the Shank
Instructions for threading a needle through the underside of a button, ensuring that the button is centered on the mark before returning the needle to the back of the fabric and stitching through the shank a few more times.
Step 4 – Knot Off
Sewing instructions for a button with a hole in it.
How to Sew a Button With a Sewing Machine
This technique can be used to sew two-hole or four-hole buttons, but thick or domed buttons may not fit under the foot and will slip around, so you should test it first.
How to Sew a Button By Sewing Machine – Supplies
Need a button foot? You can buy a generic one that fits most low shank machines. If you’re worried about the button moving while you sew, use clear tape to keep it in place.
Step 1 – Zig-Zag
The width of the button will depend on the exact position of the buttonholes. IMPORTANT: If you put your foot on the machine before checking that the needle is going through the holes, you may break a needle on the first try.
Step 2 – Remove and Knot Off
Pull the threads to the back of the button and knot them off. How to Sew a Button – Knotting Off is a step-by-step guide on how to sew a button with a regular old button-making machine.
How to Sew a Button – 4 Holes
A 4 hole button is sewn in the same way as a regular button, except that you will repeat the process for each set of holes; you can go across twice like I did or diagonally to make a cross shape.
How do you sew a button with one hole?
Place your button in the center of the button hole and thread your needle and thread through the underside of the fabric until it reaches the knot. Pass the needle through one button hole, the diagonally opposite hole, and then back through the fabric.
How do you make a shank button?
How to Make a Button Shank
- Bring the needle up through the material where you want your button to be positioned, using 2 strands of floss or thread.
- Make 1 small secure stitch.
- Position the button in place.
- Sew the button in place, going over the toothpicks on top of the button.
What is a two hole button?
This means you’ll thread the needle through the second hole on the front of the button but not through the fabric, leaving the needle in the gap between the button and the fabric.
How do I start a button business?
Start with a small, low-cost machine and, if available, take advantage of machine trade-up programs to save money on startup costs so you can focus on marketing and advertising. Take advantage of quantity discounts on button parts offered by all major button part suppliers.
What are the two types of buttons?
Buttons Come in a Variety of Styles
- Flat Buttons, Shank Buttons, Stud Buttons, Toggle Buttons, and Decorative Buttons are all examples of buttons.
Which material is used to make the tool maker’s button?
Polyester is a common material for buttons because it is a special kind of plastic with properties that make it suitable for buttons, and it can be colored with a variety of chemical dyes.