FAQ: How To Sew Honeycomb Smoking On You Tube?

Honeycomb smocking is a type of smocking that produces a beautiful diamond pattern. Because the pleating will cause fabric shrinkage, I think it’s best to do this before starting any project construction. It requires hand stitching, which can be time consuming, but the effect of these stitches makes for a unique embellishment.

How do you sew a smocking stitch?

Stitching an Outline

  1. Remember to work smocking stitches from left to right, so bring your needle up from the back on the left side of the first or third pleat.
  2. Move the needle to the next pleat and put the needle through it from right to left at a slight angle up.
  3. Keep the thread below the needle.

Can you do smocking on a sewing machine?

Even if your sewing machine only has a few decorative stitches, you’ll be able to find ones that work for machine smocking; your sewing machine manual may be able to tell you if you have any.

What are the 5 basic smocking stitches?

Begin with one of the five basic stitches listed below:

  • Cross-stitch is an X-shaped stitch in which the thread spirals around the edge of one or both pieces of fabric.
  • Whipstitch is an X-shaped stitch in which the thread spirals around the edge of one or both pieces of fabric.
  • Running stitch.
  • Ladder stitch.
  • Backstitch is an X-shaped stitch in which the thread spirals around the edge of one or both pieces of fabric.

What is the difference between smocking and shirring?

Smocking is a decorative embroidery or shirring made by gathering cloth in regularly spaced round tucks. Shirring is defined as two or more rows of gathers used to decorate parts of garments, usually the sleeves, bodice, and yoke.

We recommend reading:  Often asked: How To Sew A Patch On Leather?

How much extra fabric do I need for shirring?

When choosing a pattern, look for at least 10u2032u2032 of ease in the area you’ll be shirring, as shirring will reduce the width of the garment by about half of its original size, depending on the fabric.

How do you calculate fabric for smocking?

Multiply the number of pleats per inch by the fabric’s finished width; for a finished 20-inch width with 10 pleats per inch and a total of 1/2 inch per pleat, you’ll need 100 inches of fabric; divide by 36 inches — the number of inches in one yard — to get 2 3/4 yards.

Is smocking stretchy?

Other major embroidery styles are purely decorative and represented status symbols, while smocking is an embroidery technique used to gather fabric so it can stretch.

How do you make fabric pleated?

Fabric is pleated by sandwiching it between two pieces of card that are laid flat on a table, the lower card followed by the fabric, and then the upper card on top to form the sandwich, which is then folded in shape and rolled up tight.

Leave a Reply

Your email address will not be published. Required fields are marked *