Question: How To Make No Sew Roman Shades From Mini Blinds And Blackout Shades?

Spiffy Speak

If you’re looking for an aesthetically pleasing, low-cost window treatment, DIY roman shades are a good option; however, they won’t last as long as handstitched, custom drapery. If you’re up for a DIY challenge or just looking for a fun craft idea, keep reading.

What are Roman Shades?

Roman shades are similar to blinds in function but have a more visually appealing design. In this article, we’ll focus on creating flat panel roman shades with back slats; if you need more inspiration, check out the following looks from Spiffy Spools.

Gather Your Materials

To make roman shades, you’ll need the following items: a mini blind sized for your window, fabric cut 12 inches longer than your window and 6 inches wider, and a medium-sized flat-head brush. Other types of glue will harm the fabric.

Tips for Selecting Your Fabric

Light-colored fabrics such as linens, cotton, and sheers exude airiness and relaxation, while darker colors and textured fabrics exude elegance and refinement. Spiffy Spools sells curtain fabrics by the yard, with over 1,000 fabrics and patterns to choose from.

How do you make Roman shades out of mini blinds?

Procedures

  1. Make pleat placement measurements and pin each for tube tape.
  2. Baste tape onto lining.
  3. Pin right sides of facing and lining fabric together.
  4. Pin existing tube tape (that is basted to liner) down through both fabrics, ensuring smooth and flat.

How do you make a Roman shade without sewing?

Iron your fabric, then iron the edges of the fabric to make seams.

  1. Place fabric tape under the seam flap, press down and peel off backing, then place flap over tape and follow package instructions.
  2. If you need a liner, repeat this process with lining fabric.
  3. Use fabric tape to attach the liner to the shade fabric.
We recommend reading:  How To Knit Yarn Over Of Yo?

Can you use blackout lining on Roman blinds?

Blackout linings are recommended for all bedroom Roman blinds, as well as rooms that require a high level of sun blocking, such as media rooms and home theaters, as well as very lightweight fabrics like lightweight cotton, faux silk, and taffetas.

How do you make a simple Roman shade?

  1. Step 1: Determine the length of the blind by placing it on your work surface with the front facing down.
  2. Step 2: Remove Extra Blind Slats.
  3. Step 3: Arrange Slats on Fabric.
  4. Step 4: Attach Fabric Around Bracket.
  5. Step 5: Secure Fabric to Blind.

How do you make a tension rod out of Roman shades?

Once your shade is up, add two more tension rods to the outside of the fabric as shown… Fold over some of the fabric over the top tension rod… And voila, you have a new roman shade… I had an extra fold at the bottom because I folded my fabric over the tension rod in the first step.

Can you make a Roman shade with cordless blinds?

Grab the bottom bar from the blinds and string those cords through the bottom holes where they came through before: Now, we want to lock this bar in place, just below where the rings are. It doesn’t have to be perfect, but it should be even on both sides. Congratulations, you’ve made cordless roman shades!

How do you restore a Roman shade?

  1. Step 1: Find your pattern center. I’m a little (ok, a lot) OCD about things lining up, so this is the most difficult step for me.
  2. Step 2: Cut your fabric length.
  3. Step 3: Attach the fabric at the top of the shade.
  4. Step 3: Create your folds.
  5. Step 4: Attach the fabric to the shade.
We recommend reading:  How To Knit Sleeves Flat?

Can you turn curtains into Roman blinds?

I’ve tried making Roman blinds out of old curtains with mixed results; again, it’s not noticeable until you lay the fabric flat and try to cut an exact rectangle to make your blind; therefore, your blind may not be as tight and crisp as if you used brand new fabric.

How do you make Roman shades without a dowel?

If you’re not using dowels, add 4u2032u2032 to the length you want your shade to be (from the measurements above), for example, if your window length is 78 1/2u2032u2032, your fabric length will be 78 1/2u2032u2032 4u2032u2032 = 82 1/2u2032u2032.

Should Roman blinds be recessed or not?

In conclusion, we recommend hanging Venetian, roller, and vertical blinds from within the recess; however, Roman blinds would be better suited outside the recess because they allow more light into the room.

What is the best fabric for Roman shades?

The weight and structure that linen and linen blends provide are the main reasons why they are the best fabrics for Roman shades, but linen can also be transformed into a variety of colors and textures to suit almost any design style.

How much material do I need for Roman blinds?

PRO TIP: Add at least a 6cm trimming allowance to the cut drop to ensure that the fabric can be cut square during the making process. Fabric is usually approx 137cm wide, so most blinds less than 127cm wide will only need one width of fabric (check your fabric width).

How do you make a professional Roman shade?

The Correct Way to Sew Roman Shades

  1. Cut your fabric and liner.
  2. Sew Rod Pockets.
  3. Sew Trim to Fabric.
  4. Sew Liner onto Fabric.
  5. Insert your dowels.
  6. Turn the shades inside out.
  7. Hem the Roman shade.
We recommend reading:  How To Knit A Ribbed Sweater?

Are Roman shades washable?

Many Roman Shades are now made of high-quality washable fabrics that can be gently washed with mild soap and water; however, if your Roman Shades are embroidered, brocaded, or made of a delicate non-washable fabric, you may want to have them professionally cleaned.

Leave a Reply

Your email address will not be published. Required fields are marked *