How to sew 2 curtains panels together
Sewing two curtain panels together can give you a luxurious, high-end look, and learning how to sew two curtain panels together is a cost-effective way to get the drapery you’ve always wanted. It’s also much less complicated than you might think.
Sewing Unlined Curtain Panels Together
If your curtain panels are patterned, make sure they match before and after pinning them. Sew a vertical line down the entire length of the two panels, leaving an adequate seam allowance. For a professional finish, serge or zig-zag stitch along the raw edges of each curtain panel.
How do you sew drapery panels together?
Unlined Curtain Panels Sewn Together
- Begin by laying the two panels you want to join side by side on a flat surface.
- Unpick the stitches on the top and bottom of each curtain panel after the vertical seams have been undone.
- Prepare each curtain panel for sewing by ironing the side seams flat.
How do you hang curtains on a extra wide window?
Keep it Simple with Kwik-Hang’s Damage-Free Curtain Rod Brackets and Stylish Curtain Rods Kwik-Hang’s damage-free curtain rod brackets and stylish curtain rods are the perfect solution for hanging curtains on large windows! Simply align the brackets to your window trim, tap with a hammer or mallet, and hang your curtains in minutes!
How wide should Window panels be?
If you’re hanging curtains just to frame a window and don’t plan to close them, you can round down to 112 times the width.
Should I sew curtain panels together?
When you place the right sides of the panels together to sew a new seam to create one extra wide panel, it’s critical to remove the seam on the outer side of each panel if they’re facing down). This ensures that the correct sides of the drapes are sewn together. Remove pins and press the seam open.
How do I match prints on my seams?
If you’re matching two different pieces at the side seam, such as a front and back, lay them out next to each other, keeping a straight line running across the bottom of the pattern pieces (again, anchoring on a stripe or other element is helpful), and match seamline to seamline.
How do you match seams perfectly?
How to perfectly match seams.
- Pin your seam allowances together.
- Starting from the garment out to the end of the seam, start hand-basting small stitches as close as possible to where the seams meet.
- Sew your new seam.
How do you cover wide short windows?
Hang Floor-Length Curtains If your window is both short and wide, a medium-weight fabric is a better choice, and pleated curtain styles, which help create a frame on both sides of the window and make it appear narrower, are a good choice.
Can I use 3 curtain panels?
On double windows, some people use three sections of curtains: one on each side and one in the middle; for this look, you’ll need three to six panels; in most cases, you’ll need four panels; if you want a wispy look, you’ll only need two panels.
Can you hang curtains higher than the window?
Curtains should be hung four to six inches above the window frame, according to Architectural Digest, so install your curtain rod accordingly. Hanging the curtain rod high will make the window appear taller.
How many panels does a window need?
For instance, if your window is 36″ wide (window width x 2 = 72″), you’ll need curtains with a minimum width of 72″ or 2 panels, which will give you about 100″ to 120″ of width, which will look nice and full. Always round up to the next full number.
How much wider Should a curtain pole be than the window?
Before you start measuring for your curtains, make sure the track or pole sits 15-20cm above your window and is 15-20cm wider on both sides than your window.
How much wider Should curtain rod be than window?
As a rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame, or extend the rod up to ten inches beyond the window’s frame to create the illusion of a wider window.