Quick Answer: How To Sew On A Elastic Band With Casing?

How to sew an elastic waistband casing

We’re going to start transitioning into sewing not only objects, but also clothing! One of the most important skills to know is sewing an elastic waistband casing. It’s been a busy summer for me, so I haven’t had much time to sew.
Fold and iron the top edge towards the inside by 3/8u2033 (1 cm), then again by a larger amount. Add 1/4u2033 (0.5 cm) to the elastic width, bringing it to 1u2033 (2.5 cm). Sew from the second set of double pins all the way around to the first set. Overlap the elastic ends by 1u2033 (2.5 cm) and pin them in place.

How do you sew elastic to fabric directly?

What is the best way to sew elastic to fabric?

  1. Pin the end of your elastic to the end of your fabric and stitch to secure, then pull the elastic tight and pin the next section of elastic to the next pin on the fabric.

What Stitch do you use to sew elastic?

Sew with a stretch stitch or a zigzag stitch to allow the elastic to stretch.

  1. Pin the elastic to the wrong side of the garment, matching the three pins on the elastic and on the fabric.
  2. Switch the elastic to the fabric, stretching the elastic between the pins.

How do you put in an elastic waistband?

Detailed instructions

  1. Cut Your Elastic to Fit. Cut your elastic to fit the part of the body it’ll be going around, following the instructions for your pattern.
  2. Pin the Ends Together.
  3. Join the Ends.
  4. Form a Square of Stitches.
  5. Divide the Elastic.
  6. Divide the Waistband Fabric.
  7. Apply the Band to the Fabric.
  8. Stitch.
We recommend reading:  How To Knit Triangle Shaoe?

How do you attach a drawstring to yoga pants?

Make Your Next Pair of Tights with a Drawstring

  1. Pin the center of your inner waistband piece, one inch from the bottom of the elastic, and then use a fabric marker to mark one inch to the left and right of the pin.
  2. Sew two buttonholes on top of the markings you made in Step 1.
  3. Sew a casing for your drawstring.

What is a casing stitch?

Casings can be used to enclose a drawstring tie or elastic at the waist, ankle, or wrist when making clothing, or at the opening of a bag or purse.

What can I use as a drawstring?

You can make a drawstring out of any piece of cord, trimming, ribbon, or fabric; ribbons are more feminine, while cords are better for projects that require sturdy fastenings, such as bags; you can also experiment with different colors and add your own personal touch by using contrasting materials.

Can you cut elastic down the middle?

As a result, many people are asking if they can cut elastic lengthwise u2013 for example, u201cCan I cut 1/2u2032u2032 elastic in half to make 1/4u2032u2032 elastic?u201d I do not recommend cutting elastic lengthwise because it almost always causes it to fray and/or lose its integrity.

How much elastic do I need for my waistband?

A waistband’s elastic should be about 2 inches smaller than your waist measurement.

Can I cut elastic to make it thinner?

Yes, thick elastic can be cut into thinner strips.

What tension should I use for stretch fabric?

To stitch your stretchy fabric, use the appropriate tension setting; for materials like elastane, lycra, and many others, a higher tension level of 2-3 should suffice.

We recommend reading:  Quick Answer: How To Tie A No Sew Throw Quilt?

Do you stretch elastic when sewing?

Sew all the way around the elastic, slightly overlapping the beginning of the stitching after you’ve sewn all the way around the elastic to make it the same length as the fabric.

Leave a Reply

Your email address will not be published. Required fields are marked *