Here’s the Secret to Sewing Shirt Collars So Sharp, They Could Practically Slice Cheddar
You’ll be turning out ahh-mazing shirt collars with this quickie tutorial, and you’ll have major bragging rights when you tell people you made them yourself. The key is knowing how much fabric to shave off and how much length to cut.
1. Add Fusible Interfacings to Collar Pieces
Most classic shirt collars are made up of two pattern pieces; fusible interfacings should be applied to one of each piece to give it structure and body; test your interfacing on scraps to see what works best for your fabric.
2. Sew the Long Collar Seam
Sew the seam on the long outer edge, as shown in the image above. Press the long seam open before turning and pressing to give a crisper edge. If your collar pattern has 5/8u2033 seams, trim them down after stitching to reduce bulk.
3. Sew the Short Edge Seams
Sew the side edges of the collar together to ensure there is no loose thread on the inside of the animal print blazer, and make sure the collar is buttoned up all the way at the top and bottom with an extra stitch near the point for extra security.
4. Trim and Turn
Gently push the corner of the collar to create the point with a point turner or another blunt tool, taking care not to poke a hole in the fabric. If necessary, tease out the last bit of the corner with a pin or needle.
5. Press the Collar
Because it offsets the bottom edge a little, roll the seam edge slightly toward the underneath.
6. Attach the Collar to the Collar Stand
Using the dots and notches as guides, align the collar to the interfaced collar stand piece, then sandwich the collar between the two collar stand pieces, wrong sides facing out, pin in place, and stitch from corner to corner with a 3/8u2033 seam allowance.
7. Trim the Seam Allowances on the Collar Stand
Trim the stand’s edges, leaving about 1/8u2033 of space between the two ends; no notches are required, and the seam turns out beautifully after being trimmed.
8. Press Your Collar Again
Turn the collar right side out and press the round sides, working the seam all the way to the edge for a crisp finish. Press the rest of the collar.
What stitch is used for t shirts?
The stitches that you typically see on commercial t-shirt seams are an overlock stitch, which requires a special type of sewing machine (e.g., a serger) designed specifically for this purpose.
What stitch is used for a collar?
Now it’s time to sew the collar in place, which can be done in one of two ways: overcasting (also known as oversewing or whipstitching) or backstitching.
What are shirts with collars called?
A dress shirt, also known as a button shirt, button-front shirt, or button-up shirt, is a shirt with a collar and a full-length front opening that is fastened with buttons or shirt studs.
How do you make a ladies collar for a shirt?
Yes, you can sew a shirt collar without difficulty.
- Sew the Long Collar Seam.
- Sew the Short Edge Seams.
- Trim and Turn.
- Press the Collar.
- Attach the Collar to the Collar Stand.
- Trim the Seam Allowances on the Collar Stand.
- Press Your Collar Again.
What Stitch do you use for stretchy fabric?
A zigzag stitch is the best stitch for stretchy fabric because we need a flexible stitch that can stretch with the fabric. There are different zigzag stitches depending on the fabric and its intended use.
What thread should I use for stretchy fabric?
Textured polyester or textured nylon threads, such as A, are the most common threads used to sew stretch knit fabrics.
What Stitch is best for clothes?
A straight stitch is a strong stitch that is straight with a thread on top (the upper thread) and a thread on the bottom (the bobbin thread), with the threads interlocking at regular intervals. A straight stitch is a most commonly used stitch for almost all construction sewing.
How do you attach a collar to a dress?
Match the notches at the waist seam, shoulder seams, and collar, making sure the collar meets the start of the lapel. Pin the facing in place all the way around from hem to hem.
How do I make a collar and collar stand?
Turn right side out, tuck seam allowances into collar stand, and press. Top-stitch around collar stand 3 mm from the edge, making sure the lower folded edge of the collar stand is caught in the seam. Sink-stitch (stitch in the ditch) along the neckline seam to connect the lower collar stand for a clean / classic look.
Which type of shirt collar is best?
What kind of dress shirt collar should I wear?
- Straight Collar. Also known as the point collar, the straight collar is versatile enough to be worn with a tie to work and then without a tie for dinner.
- Windsor Spread Collar.
- Buttondown Collar.
- Tab Collar.
- Cutaway Spread Collar.
- Club Collar.
- Eyelet Collar.
Are cutaway collars in style?
While runway designers and cutting-edge fashion may be returning to forward point collars, the cutaway collar remains the more modern and bold collar choice among the general public. In a sea of standard business attire, a cutaway collar definitely adds a level of sprezzatura.
What is a French collar?
The French collar is a classic among shirt collars, distinguished by its wide shape and pointed collar legs; it is an all-rounder that can be worn with any tie and any tie knot, and it can also be worn open with the first button for a more casual look.