FAQ: How To Sew Over The Seam In Jeans?

Seam Finishes for Jeans // Ginger Jeans Sewalong

A serger makes finishing seams a breeze, but it’s not required; if you want to use flat fell seams, you can make this pattern with a regular machine.

FLAT FELL SEAMS

These seams are similar to french seams in that the raw edge is completely encased, but the process is a little different. They are sturdy enough to withstand the rigors of gold mining, and pretty enough to be worth the time for your own jeans.

SERGED SEAMS

If you have a serger, you can get a neat finish on the inside by trimming and overlocking your seams, then sewing them on your regular machine and finishing them on the serger. Quick serger tip: your machine should have some seam allowance guidelines.

FINISHING SEAMS ON A REGULAR MACHINE

If you don’t have a serger, you can still get a nice finish by trimming your seam allowances to 3/8u2033 and zigzagging the seam, which will show the difference even better if your machine has an “overlocking stitch.”

GETTING EVEN TOPSTITCHING

If you have an edge-stitch foot, you can use the guide in the center to help create nice, straight topstitching lines.

How do you top stitch jeans?

6 Tips for a Nice Jeans Topstitching Tutorial

  1. Chalk it in first.
  2. Use topstitching thread in your top needle and regular thread in your bobbin.
  3. Increase your top thread tension.
  4. Increase your stitch length.
  5. Don’t backstitch!

Are jeans hard to sew?

Denim is one of those fabrics that people avoid because it’s thick, which means that when you fold it or sew two pieces together, it just gets thicker, but sewing your own jeans isn’t that difficult if you handle it correctly.

We recommend reading:  How To Knit Ribs?

What seams are used on jeans?

There are seven different types of seams.

  • Double-stitched seam. This type of seam is similar to a plain seam, but there are two lines of stitching attaching the fabric for added strength.
  • French seam.
  • Bound seam.
  • Flat-felled seam.
  • Welt seam.
  • Lapped seam.

What does a walking presser foot look like?

To begin with, the Walking Foot differs from other sewing machine feet in that it is large and bulky, and it has an arm that attaches to the needle bar, which instructs the sewing machine to pull the top and bottom fabrics through the sewing machine at the same time.

Can I sew upholstery with a regular sewing machine?

You can’t use a heavy duty thread and an industrial grade needle on a regular household sewing machine when sewing upholstery, so make sure you use the correct machine for your sewing needs. Otherwise, your project will look inconsistent.

What thread should I use to sew denim?

Use an all-purpose polyester thread to construct your garment, then switch to an upholstery or topstitching thread for topstitching. When sewing with denim, use a new needle.

What Stitch is best for denim?

Jeans are mostly sewn with a sewing machine, then overlocked to finish the edges; a 3-thread overlock stitch is all that’s required; there’s no point in using extra needle thread with a 4-thread overlock when the sewing machine has already sewn the construction seam.

What is a 90 14 needle used for?

90/14 u2013 suitable for medium weight fabrics, such as slightly heavier weight cotton, polyester, linen, and lightweight upholstery fabric; lighter weight fabrics, such as silk (chiffon, organza, crepe-de-chine), will require a smaller needle.

We recommend reading:  Readers ask: What Does It Mean To Sew The Seams Open?

What is a 80 11 needle used for?

Regular point needles from SINGER are designed for machine stitching and are best for lightweight woven fabrics. Needles are compatible with SINGER, Brother, Kenmore, and other high-quality sewing machines.

Can I sew denim on a regular sewing machine?

If you’re only sewing lightweight denim, a regular sewing machine with the right needles, thread, and technique will suffice; however, if you’ll be sewing denim on a regular basis or with heavy denim, a heavy-duty sewing machine with a strong interior frame and more powerful motor is recommended.

Leave a Reply

Your email address will not be published. Required fields are marked *