How To Sew A Camper Awning Back Onto The Awning Mount?

Can You Shorten An RV Awning? Here’s How to DIY

Knowing where to dump your tanks is half the battle, and the Sani Dump Station Guide will help you find them. Because new awnings are expensive, shortening an awning may be a better option than replacing it. No special tools are required, but multiple people are required to make removal and reinstallation easier.

Tools Needed to Shorten an Awning

Here is a list of tools that you will most likely need to shorten your awning. Research your make and model to determine the best way to begin your project. You must have at least one other person to assist you with this project. Attempting this on your own would be extremely dangerous.

Why Shorten Your Awning?

Damaged material or the wrong size replacement are good reasons to shorten an awning, and if you’re looking for a good deal on a replacement but it’s too big or too small, shop around.

Step 1: Inspect Awning

Measure how long your current awning is and have a clear plan on how much you need to shorten it before you install it; take many pictures of the current installation and use markings to help you understand how everything goes back together; measure how long your current awning is and have a clear plan on how much you need to shorten it; measure how long your current awning is and have a clear plan on how much you need to shorten it; measure how long your current awning is and have a clear plan on how

Step 2: Stow the Awning

How to extend your awning so it doesn’t snap back at you when you unplug it.

We recommend reading:  How To Knit In The Back?

Step 3: Disconnect Awning from your RV

Then, remove the bolts from the rafter brackets that connect the awning to the RV; this can be tricky and awkward, so enlist some help. Each RV will be a little different, but the general process will be the same.

Step 4: Unwind and Remove Torsion Springs

Drill out the rivets connecting the end cap to the tube with vise grips, then carefully unwind the torsion spring by rotating the vise handles. This YouTube video is extremely helpful in understanding how to go about taking apart your awning.

Step 3: Cut the Awning Roller Tube

Next, we’ll cut the awning tube, making sure the springs and end caps fit correctly if you’re replacing an old one with a new one. The metal may heat up as you cut due to friction, so be careful around any rough edges.

Step 4: Shortening the Fabric

If you’re repurposing an old awning, inspect the fabric for any holes that need to be patched before sewing the fabric’s edges to prevent fraying. Most home sewing machines aren’t designed to sew this type of heavy-duty fabric.

Step 4: Reassemble

How to reassemble and reinstall an awning by simply reversing the steps used to disassemble your RV. The video below is part two of a two-part series on how to reattach and reinstall the awnings.

Step 5: Reinstall Awning on the RV

Measure the distance between the bolt holes on the awning and mark them on the side of the RV. Predrilling the new locations will make installing the rafters easier. Add some silicone or sealant around the bracket holes before bolting on the rafter brackets.

We recommend reading:  FAQ: What Type Of Stitch Do I Use To Sew A Pocket?

After the Reassembly

Check that the spring is engaged and has enough tension to roll the awning up; if any of the screws are loose, tighten or replace them; if the awning does not fully roll up, add another revolution; if the spring is too tight, unwind a revolution.

Potential Dangers

Do not attempt to remove or install an awning on your own; learn what will be required and ensure that you have the skills to complete the repair. Most RV dealerships and even sign shops can assist with some of these repairs.

How do you put an RV awning back on track?

Pull it back to where it belongs, then put a screw in the track to keep the awning from creeping out again. Just shove it back in, then close the channel down as far as you can reach with pliers, making sure the material is centered on the roller.

How do you remove an awning rail?

To begin, remove the plastic insert in the middle of the rail to reveal the attachment screws. Remove the screws and remove the rail using a thin, flat paint scraper. Don’t be tempted to use a screwdriver because you risk bending the rail.

How do you fix a saggy awning?

Most sagging awnings can be fixed by readjusting the screws that connect the awning to the mounting bracket; however, if you have extended the awning as far as possible and the fabric still sags, you may need to purchase an awning stabilizer.

How do you adjust the tension on a retractable awning?

Adjusting the Awning Fully unroll the awning and then slide the upper arm into place. Pull the awning tube downward and toward yourself while standing in front of the awning. Tighten the knob on the upper tensioning arm with your free hand. Repeat this step with the other tensioning arm.

We recommend reading:  How To Knit Bottom Of Socks?

How do I adjust the tension on my awning?

Standing in front of the awning and facing the back, turn the front awning leg counter-clockwise. Because this is the side with the ratchet catch, the awning may try to roll up on you a little – just tell your helper to hold it tighter – and it should eventually turn all the way around.

What is the best RV awning replacement fabric?

Sunbrella, a breathable acrylic that is recommended for the outdoors, dries quickly, and has a high tolerance for UV rays, is used to make high-quality RV awning fabrics. The finish on this fabric will fade over time.

How much does it cost to replace RV awning fabric?

Expect to pay between $6.50 and $10 per square foot if you just replace the fabric, and between $300 and $4,000 if you replace the entire awning, depending on the type and size.

Can you add an awning to a pop up camper?

Finding a bag awning small enough for a small pop-up camper is a difficult task, but Shade Maker bag awnings have awnings that will do the trick. If you have a smaller pop-up camper, these bag awnings are just what you need.

Leave a Reply

Your email address will not be published. Required fields are marked *