Quick Answer: How To Sew A Patterned Item Where The Pattern Faces Correct Direction?

How to Match Plaids, Stripes, and Large Patterns

The Breton stripe is named after the French region of Bretagne (Brittany), where it was first worn by local fishermen and sailors. Nothing beats a perfect pattern match for giving a Breton striped tee or pair of plaid pants a professional, finished look.

Helpful Terms

Even plaids, like gingham or houndstooth, have a checkered appearance to the pattern. A matched mid- or large-scale pattern is considered a sign of quaility.

Choose a conducive pattern

In general, looser, simpler garment patterns with few pieces are the easiest to match; more shaping, darts, and detail means the garment will be more challenging to match in some cases.

Be aware of the bias

Stripes and medium or small-scale patterned fabric cut on the bias can be used to create attractive detailing for yokes, plackets, pockets, and cuffs; stripes can also be placed running in a different direction on detail pieces. There is no magic number for how much extra fabric you should buy to match large scale prints, plaids, and stripes.

Match the most visible seams first

If you’re new to pattern matching, start with a pattern with j. If you’re new to pattern matching, start with a pattern with j. Be careful of placing prints directly at the apex of the bust on women’s garments. If your pattern has a strong horizontal element, making the element run unbroken across the front will make your sewing look professional.

Prioritize your pattern matching

Fabrics can be cut on the grain as shown below, or you can piece them together or cut from another fabric if you run out of fabric. Facings, linings, and other non-visible pieces can also be cut from leftover fabric without pattern matching.

We recommend reading:  How To Knit Your Own Christmas Stocking?

Three methods for cutting

The layout of the paper pattern pieces on the fabric is the most important part of pattern matching. Lay out your fabric in a single layer with the right side up and anchor a key spot on your pattern, such as the top right corner, on a stripe or other image.

Draw the Pattern on the Pattern

This method of pattern matching is especially useful for large-scale patterns and fabric with a printed pattern that doesn’t show through to the wrong side; you’ll need a pattern cut from pattern paper for this method, and you’ll be marking on the pattern.

Cutting Double

The 3rd Battalion, Royal Regiment of Scotland’s official plaid, this method works well with medium- to large-scale and even patterns. The origin of the term “Black Watch” is unknown, though a “watch” generally refers to a militia.

Sew it up

After you’ve cut your fabric, take extra care when pinning and sewing it. Hand baste those tricky seams that want to slip out of alignment. You may need to move a piece up or down by an eighth of an inch or so to keep the pattern matched.

How do you layout a pattern on material?

If a pattern piece has a “place on the fold” line, pin the pattern along the fold, extending pin tips beyond the fold to avoid cutting the fabric along the fold. Some pattern pieces may need to be placed with their printed sides down.

Do you cut patterns on the wrong side of fabric?

Fold the fabric as instructed, right sides together, with the right side (the pretty side) being a darker shade than the wrong side. (On rare occasions, you may be instructed to cut a fabric on the right side, or to “cut one,” which means to cut on single layer.)

We recommend reading:  How To Knit Switch Colors?

How should you layout the pattern pieces to avoid wasting fabrics?

When cutting one layer, however, the pattern pieces must be placed printed side up and on the right side of the fabric; otherwise, pattern pieces may fit the wrong side of your body. When working with napped fabrics, make sure to use the “with nap” layout.

What is the wrong side of fabric called?

The face of fabric, also known as the right side, is the side of a fabric that is meant to be seen; the other side, the wrong side, is hidden on the outside of the garment when it is finished.

What does right side facing mean in sewing?

When sewing two pieces of fabric together, the phrase “right sides together” or “right sides facing” is commonly used. This means that the fabric’s “right sides” will be touching as you sew the seam, and when you turn the fabric over, you won’t see the seam and it will look nice and flat.

Is there a right and wrong side to felt?

The felt is non-directional, has no right or wrong side, and the color is consistent throughout. It comes in highly saturated, lightfast colors that naturally repel soiling and moisture, and it can be cut with the edges left raw because it’s a nonwoven.

How can I trace a pattern without cutting it?

Tracing a sewing pattern, which you can do by laying it out on a table and covering it with a sheet of paper, is the best way to use it without cutting it. Tracing the pattern allows you to make the size you want.

We recommend reading:  How To Knit A Pom Pom Hat?

What can I use to trace a pattern?

There are no rules about what kind of paper to use for sewing patterns; try tracing paper, baking paper, lightweight flipchart paper, spot and cross paper, or even Swedish tracing paper, which is a stitchable material that’s great for making toiles.

Leave a Reply

Your email address will not be published. Required fields are marked *