FAQ: How To Sew A No Sim Pillowcase Site:Youtube.Com?

Round Carpet Living Room Coffee Table Blanket Bedside Blanket Fl

This series documents the design and construction of a storage cabinet I built to hold my wife’s sewing machine, which is made of 3/4 maple plywood with solid maple trim. High lumber prices prompted me to use plywood for the case and doors and solid maple for the face frame and trim.
Since Worx is having a Labor Day sale, I thought I’d share a video I made about the Worx tools I own and why I bought them. The “Joint-Matic” was a stand-alone router-based tool produced by Shopsmith in the 1990s.

How do I make a no sew pillow case?

How to Make a Pillow Cover That Doesn’t Need to Be Sewn

  1. Measure and cut fabric three times the width and two times the height of the pillow form (Images 1 and 2).
  2. Cover Pillow Form. Place the pillow form in the middle of the fabric piece and fold the fabric in half to completely cover it (Images 1 and 2).

How do you sew a pillowcase by hand?

The contents are hidden.

  1. 2.1 Step 1: Select Fabric.
  2. 2.2 Step 2: Cut Fabric.
  3. 2.3 Step 3: Fold Fabric.
  4. 2.4 Step 4: Pin (Font and Back) Sides Together.
  5. 2.5 Step 5: Sew.
  6. 2.6 Step 6: Cut Off Thread.
  7. 2.7 Step 7: Insert Pillow.

How do you make a pillowcase step by step?

Detailed instructions

  1. Place your cuff fabric right side up on your work surface.
  2. Roll Up the Main Fabric.
  3. Fold Up the Cuff Fabric.
  4. Sew the Raw Edges.
  5. Unroll and Press.
  6. Trim to Size.
  7. Finish the Pillowcase.
  8. Trap the Raw Edges.
We recommend reading:  How To Knit 2 Toe Up Socks On 2 Circular Needles?

How do you make a pillow case stay on a pillow?

Apply Velcro to the inner side of the flap first, then to the case itself at the point where the flat and the pillow meet, either with glue or by sewing; the pieces should be able to meet when the flap is folded. Finally, insert the pillow and secure the flap with Velcro.

How much fabric is needed for a standard pillowcase?

A finished standard pillowcase should measure about 22.5 inches by 31.5 inches, allowing for fill depth, seaming, and a 4-inch hem. If the fabric is preshrunk, one yard of 45-inch-wide fabric should be enough to make one standard case.

Is it easy to sew a pillowcase?

Sewing a pillowcase is a great project for beginners because it allows you to practice foundational sewing skills like squaring up fabric, measuring with a sewing gauge, pinning, and using the 8 sewing basics.

How much bigger should a pillowcase be than the pillow?

If you’re buying a ready-made pillowcase, choose one that’s 1/2 to 1 inch longer than the pillow length and 2 1/2 to 4 inches wider than the pillow width.

What is the best fabric to make pillowcases?

The best pillowcase materials are as follows:

  • Cotton is one of the most common pillowcase fabrics.
  • Nylon is another common pillowcase fabric that is usually made to look like silk.
  • Linen is a high-quality, natural flax product that is no longer produced in large quantities.

How do you make an 18 pillow cover?

To make an envelope pillow cover for an 18 x 18 pillow form, follow these instructions:

  1. Wash and dry your fabric (if it’s a natural fiber fabric) so it doesn’t shrink later.
  2. Cut two pieces of fabric, piece A 18 18 inches and piece B 18 26 inches.
  3. Then cut piece B in half.
We recommend reading:  How To Knit A Scarf With Seed Stitch?

How do we fold the fabric when cutting?

Fold your fabric in half lengthwise so the two selvages meet; there should be no wrinkles in the fabric. Keep in mind that your fabric may not have been cut straight, so the tops may not meet perfectly.

Leave a Reply

Your email address will not be published. Required fields are marked *