Question: How To Sew A Hem In Blue Jeans?

How to Hem Jeans: Easy Step-by-Step Guide

Hemming jeans is as simple as hemming any other pair of pants; the only potential stumbling block is the thickness at the cross seams, which can be easily overcome without breaking needles or requiring the use of extra-long needles.

The Jeans hemming process in 1-2-3 steps

Trim the hem allowance to 1 1/8 inch and double turn. Stitch down the hem. This tutorial is based on a 1/2 inch double-turned hem, similar to that found in ready-to-wear jeans.

What you will need for hemming Jeans

A size 90 is usually sufficient when using common sewing threads; however, if using the thick yellow or gold ‘jeans’ thread, a Topstitch needle size 100 may be required. Height Compensation Tool allows you to insert a thin layer under the bottom of the presser foot to level it against uneven fabric layers.

Step 1: Pin or Press the hem in

Use a dry iron to press the hem of your jeans. Puff some steam while pressing down the hem fold to relax the fibers and allow the fold to ‘collapse’ under the weight of the iron. Pin the hem in place until it is pressed in.

Step 2: Mark the hem allowance

Using the end of the gauge as a guide, mark the hem allowance with chalk. TIP: Marking every inch or so will make it easier to trim the allowance without having to draw a continuous line along the entire hem.

Step 3: Trim the excess length

To reach the chalk markings, cut the hem of your skirt at a diagonal angle, pivot, and trim the excess length along the marked line. TIP: It’s easier to pivot into the marked lines if you cut in at a diagonal angle.

We recommend reading:  Quick Answer: How To Sew Patch On Inside Of Leather Jacket?

Step 4: Double-Turn the hem allowance to form the hem

Stitching will begin at the cross seam on the inseam (inside of the leg), leaving a small gap (scant 1/8 inch) between the raw edge and the original hem fold. To pin or not to pinu2026 that is the question. Jeans Foot #8D combines the straight stitch feature with added traction on the fabric.

Step 5: Secure the hem seam at the beginning

Select the Needle Down function to keep your hem aligned and avoid ‘jogged’ stitches. Secure the beginning of the hem seam at the cross-seam, 5-6 stitches.

Step 6: Stitch the hem with a Triple Straight Stitch

Begin sewing the hem seam, just until the foot is clear of the cross seam. After a few stitches, the rear of the foot will be past the (thick) thick (cross seam). Remove the Height Compensation Tool from under the foot.

Step 7: Lock the stitches at the end of the hem

The Height Compensation Tool is no longer required with the presser foot on top of the thicker cross seam. Since 1986, all computerized BERNINAs have remembered the settings for at least the last two stitches you’ve used, a feature known as Temporary Altered Stitch Memory.

How do you hem blue jeans by hand?

Hem Jeans by Hand is a step-by-step guide on how to hem jeans by hand.

  1. Pin the cuff after measuring around each leg.
  2. Stitch in a line just below the bottom seam.
  3. Continue sewing in a line all the way around the cuff.
We recommend reading:  Often asked: How To Sew Bra Pads Into A Dress?

What stitch is used to hem jeans?

Stitch around the edges of your jeans to prevent fraying with a standard sewing machine zig-zag stitch or a serger on the edges. Pin the jeans with a 12 inch seam allowance all the way around on both legs after you mark and cut them.

How do you hem jeans and keep the original hem?

Steps to follow:

  1. Determine Length. Try on your jeans (don’t forget to wear shoes) and assess the length.
  2. Fold and Pin.
  3. Measure.
  4. Unpin and Repin.
  5. Fold Up the Hem.
  6. Stitch Below the Hem.
  7. Trim and Serge.
  8. Press and Topstitch.

How do you hem raw edges on jeans?

There’s no need to hem the denim or sew in a seam above the raw edge; the hem will fray perfectly after a laundry cycle and look completely fine (just like the original raw hem).

How do you hem pants for beginners?

In just a few steps, you can hem your pants:

  1. Remove the old hem. Measure the amount of excess fabric and trim it.
  2. Fold the new hem.
  3. Sew the new hem by hand or with a sewing machine.

What is raw hem jeans?

It’s also known as frayed hem or released hem, and while you may not know the “official” name, I’m sure you’ve seen it u2014 it’s that seemingly DIY trend that looks like you skipped the tailor and just cut off the jeans yourself.

How much does it cost to hem jeans?

Denim is a fabric that is used to make

Denim Approximate Cost
Hem $10 – $20
*slimming works best on Original Hem $15 – $25
non-distressed denim Slim Leg $25 – $35
Adjust Waist $25 – $35

Leave a Reply

Your email address will not be published. Required fields are marked *